Product Description & Info
Formerly ASC-22G, this new 25 Gram syringe of Arctic Ceramique 2 has much improved properties
Tri-Linear Ceramic Thermal Compound
The high-density, ceramic-based thermal compound
specifically designed for modern high-power CPUs and high-performance heatsinks
or water-cooling solutions.
Tri-Linear Ceramic Content:
Like the original Céramique, Céramique 2 uses only
ceramic fillers so it is neither electrically conductive nor capacitive. The
tri-linear composite of aluminum oxide, zinc oxide and boron nitride allows the
thinnest possible bond line with modern processors, heatsinks and electronics.
Critically-sized particles and new ultra-high shear mixing techniques maximize
Céramique 2's thermal performance and help maintain a stable homogenous
suspension. This exclusive combination provides performance exceeding most metal
Polysynthetic Suspension Fluid:
A new oil mixture, improved thermal filler properties
and increased particle deagglomeration, dispersal and density enhance Céramique
2's thermal performance and overall stability. The third generation
polysynthetic suspension fluid combines advanced synthetic oils to maximize
wetting and stability while allowing a higher density of thermally conductive
Céramique 2 is engineered to not separate, run,
migrate, or bleed.
Céramique 2 does not contain any metal or other
electrically conductive materials. It is a pure electrical insulator, neither
electrically conductive nor capacitive.
2 to 10 degrees centigrade lower CPU full load core
temperatures than standard thermal compounds or thermal pads when measured with
a calibrated thermal diode imbedded in the CPU core.
The amount of compound remaining in the 25-gram
syringe is easy to determine as the rear of the plunger is perfectly flush with
the flange when the syringe is empty.
Easy Clean Up:
Céramique 2 can easily be cleaned from CPUs and
heatsinks with ArctiClean, isopropyl alcohol or any of the cleaners listed in
the product instructions.
Average Particle Size:
<0.36 micron <0.000014 inch (70 particles lined up in
a row equal 1/1000th of an inch.)
Peak: –150°C to >185°C
Long-Term: –150°C to 130°C
25-gram syringe. (Approximately 9.2cc)
At a layer 0.003" thick, one syringe will cover about 200 square inches.
Due to the unique shapes and sizes of the particles
in Céramique 2, it will take a minimum of 25 hours and several thermal cycles to
achieve maximum particle to particle thermal conduction and for the heatsink to
CPU interface to reach maximum conductivity. (This period will be longer in a
system without a fan on the heatsink.) On systems measuring actual internal core
temperatures via the CPU's internal diode, the measured temperature will often
drop slightly over this "break-in" period. This break-in will occur during the
normal use of the computer as long as the computer is turned off from time to
time and the interface is allowed to cool to room temperature. Once the break-in
is complete, the computer can be left on if desired.
You are viewing Arctic Silver Ceramique 2 - 25 Gram Syringe (CMQ2-25G)