Home > Case Hardware > Computer Cables > ATA 133 RoundedCables >

ATA Copper Mesh 1-Device 18"


ATA Copper Mesh 1-Device 18"

ATA Copper Mesh 1-Device 18"



Product Description & Info
Copper Mesh 1-Device RoundedCables would look impressive in your RAID configuation where the motherboard connectors are within short range of the hard drives.

These RoundedCables are wrapped in a durable, copper mesh enclosed in a high-quality, thick plastic sheath with boot covers on the connectors to help protect the cable wires from sharp edges and provide a clear view of the cable's inner workings.

Copper mesh cables come with pull-tabs to make an easier task of disconnecting your devices. The pull-tabs are an add-on and may be removed if you prefer a streamlined look inside your case.

Single-device RoundedCables are an even better way to keep the clutter inside your case to a minimum and to increase air flow at the same time by eliminating the extra connector you don't need. These Copper Mesh RoundedCables are enclosed in a high-quality, thick plastic sheath which helps protect the cable wires from sharp edges.

The most popular use of these particular cables is in pairs in a two-drive RAID configuration where the drives must function in tandem on their own primary and secondary IDE interfaces to achieve full performance.


See review at:

Mikhailtech.com
ata101_cp18$4.95 Qty:
ATA Copper Mesh 1-Device 18"

You are viewing ATA Copper Mesh 1-Device 18"