Finally EK is ready to offer you radiators designed for hardest
enthusiasts. Radiator is optimized for maximum heat dispatching even at
lowest fan speeds. Choosing EK-CoolStream RAD XT will give your
watercooling system a boost you needed to cool your hot hardware.
Quality at EK level and an optimal price-performance ratio make these
EK-CoolStream RAD XT radiators unique. The new radiators feature,
besides their great design and high build quality, great cooling
The copper fins are specially designed for Ultra-silent fans (with low
Airflow). The parallel coolant channels reduce flow resistance to a
minimum. On both sides of the radiator the M3 threads are integrated to
allow fan installation on both sides and radiator mounting.
The radiator has integrated G1/4" threads, allowing installation of
virtually all common fittings.
Please note: Over-tightening of the screws may damage the radiator.
Always take care that the screws do not damage the radiator. Damages of
the product because of improper use are not covered by the warranty!
- Copper fins
- Brass chambers
Dimensions (LxWxH): 520x123x47mm
Connection threads: G1/4"
Weight: Approx. 1650g
Fan installation: 16 x M3 threads on both sides each (for 4x120mm fan
Pressure tested: 8bar
1x EK-CoolStream RAD XT (480) radiator
16x M3 x 30mm screws
16x M3 x 35mm screws
Important: The included screws may be too long for some applications.
Always be sure to screw them in only so far that the radiator is not