 | |  |
| EK Waterblocks Thermal PAD BIG 0.5 mm Thickness |
Product Description & Info
Thermal conductive pad for use with EK blocks.
This thickness is used mostly for Full Cover blocks. Please check installation
manuals before purchasing to see which thickness you need.
The very flexible structure and low hardness allow great adaptivity to the
cooling surface even at low contact pressures. The thermal pad equalizes the
effect of irregularities from microscopic scale to visible scratches etc. The
surface of the pad is slightly sticky and is equipped with a protective foil
when shipped. This foil must be removed before installation. Now the slight
adhesive properties of the pad come into play and prevent slipping of the pad on
the cooler or cooled element. Of course these pads can also be cut to the
desired size. The pads can be used on VRAM modules on graphics cards as well as
on the VRM modules on a Mainboard or almost any other application where a
high-performance thermal interface is desired. Even elements with large surfaces
such as North- or Southbridge on a Mainboard are no problem for this thermal pad
as it has great thermal conductivity.
Thermal conductivity: 3.0-5.0 W/mK
Dimension: 60 x 50 x 0.5mm
You are viewing EK Waterblocks Thermal PAD BIG 0.5 mm Thickness |
|
|
