Product Description & Info
Feser Tube – The perfect relationship!
Feser Tube is a high-quality hose, which should be sufficient for the highest
requirements within the watercooling range. We made certain, that a close
bending radius can be achieved with it, without causing a kink in the hose. The
material consists of a special polyvinyl chloride (PVC) and makes the hose
extremely flexible. The smooth surface of our hose inside and outside, improves
the flow rate of the water. Additionally a large interior cross section makes
this hose ideal for high end pumps as it creates less back pressure and helps to
maximize the pump’s lifetime. The smooth external surface lets the hose appear
very noble. Feser Tube naturally possesses a "TFC - Feser Tube“
signature. Thus you cannot mistake this hose for any other. The Logo is applied
to the hose every 800mm and can be cut out if not needed/wanted.
This model is 1/2" ID x 3/4" OD.
Unique colours can be achieved if you add a different color water additive than
the Feser Tube. With the addition of UV active materials, so-called artificial
tracers, the hose begins to glow when ultraviolet light hits the material in the
hose. For this effect you only need a CCFL / UV Cold Cathode light tube which is
already available from your local Feser Company Reseller or Distributor.
||10 MPa (100 bar)
|Bend Radius Max (Percentage)
|Minimum working temperature
||- 30 °C
|Maximum working temperature
||+ 70 °C
- PVC (Polyvinylchlorid) Material
- UV reactive properties
- 5 years uv stable
- Smooth surfaces inside and outside
- TFC – Feser Tube Logo
- Highly flexible
Quantity 1 = 1 Foot of Feser Tube
You are viewing Feser Tube - FT - Active UV Hose - ID 1/2in. x 3/4in. - UV RED