After a very long development time, many pattern productions and dozens of
test runs, we have now developed a radiator, which is seeking his peers.
We only use the best materials for these radiators. The fins and water channels
consist of high-grade copper (e-Cu). The water chambers consist of a brass
alloy. We have to ensure that the layer of the black finish remains very thin,
thus the heat-air transfer is optimized to a maximum. The G1/4" thread for
the inlet and outlet of the radiator offers the highest compatibility for a wide
variety of fittings. The radiators can be installed horizontally or vertically.
For a vertical mounting the air can escape entirely from the radiator by using
the bleeder screw.
The radiators have a distinctive "TFC - Xchanger" Logo. Each radiator
after completion has been checked of impermeability and it's function. Only then
it gets the hologram label and comes with a serial number. Each radiator is a
single piece. As a result, confusion with competing brands is almost impossible.
GENUINENESS - A WONDERFUL MASTERPIECE
This X-CHANGER radiator is manufactured with the highest attention to detail and
the best materials. Every radiator is unique and has been tested for leaks and
proper heat dissipation before it gets the quality approval and leaves our
warehouse. Every radiator has it’s own serial number and proves that you
bought an original X-CHANGER.
Features
- Water Channels and Fins made out of ECu Copper Material
- Brass Water Chambers
- Black Finish (5µm)
- G1/4" Threads
- Mounting Screws for Case (4/8/12)
- Mounting Screws for Fan (4/8/12)
- Silicon Pads (1/2/3)
- Bleed Valve Screw
- Stamped TFC – Xchanger Logo
- ColorBox Packaging
- Warranty Card
- Serial Number with Holographic Sticker
- Sealed in VCI Bag - 5 Years Corrosion Protection
- 3 Years Warranty
- Compatible with all available Watercooling Systems
