Product Description & Info
The HEATKILLER ® Rev3.0 CPU sets new standards in
performance, quality and ease of installation. The development of new high-end
CPU coolers has been consistently focused on the current CPU generation. A
central flow, coupled with a nozzle plate and a very fine Cooling geometry give
the cooler a excellent cooling performance. The bottom plate is geometrically
adapted to the heat spreader and thus provides for an optimal contact to the
CPU. Despite very expensive Cooling geometry the flow resistance is extremely
low. For the use of quad-processors, the cooler has a plug-distribution plate,
the individual CPU cores will flow parallel. A modular design allows easy
removal of the HEATKILLER ®, a switch to a different mounting system is done at
any time and with very little effort. Sold separately, mounts and spare parts
guarantee extended life of the water-block even after several years,
problem-free operation. The Cooling geometry, and the uppers are made of
high-purity copper, the mounting and application of polished stainless steel. To
prevent tarnishing of the copper, the top is sealed with a special clear
lacquer.
Specifications
Material: Electrolytic copper, stainless steel
Dimensions (block): (LxWxH) 59 x 59 x 17.5 mm
Weight: about 400g
Airtight: 5 bar
Seal: EPDM 75 (max. 150 ° C)
Connection: G ¼ inch (ISO 228-1)
Compatible with: Socket 1156
Parts Included:
1x HEATKILLER ® CPU Rev3.0 1156
1x Mounting material (hold down set only) / instructions
