The new Black Nickel HEATKILLER ® Rev3.0 CPU
Waterblock sets new standards in performance, quality and ease of installation.
The development of new high-end CPU coolers has been consistently focused on the
current CPU generation. A central flow, coupled with a nozzle plate and a very
fine Cooling geometry give the cooler a excellent cooling performance. The
bottom plate is geometrically adapted to the heat spreader and thus provides for
an optimal contact to the CPU. Despite very expensive Cooling geometry the flow
resistance is extremely low. For the use of quad-processors, the cooler has a
plug-distribution plate, the individual CPU cores will flow parallel. A modular
design allows easy removal of the HEATKILLER ®, a switch to a different mounting
system is done at any time and with very little effort. Sold separately, mounts
and spare parts guarantee extended life of the water-block even after several
years, problem-free operation. The Cooling geometry, and the uppers are made of
high-purity copper, the mounting and application of polished stainless steel. To
prevent tarnishing of the copper, the top is sealed with a special clear
lacquer.
Technical Specifications
Material: Black Nickel Plated Electrolytic Copper, High-Grade Steel
Dimensions: LxBxH - 59x59x17.5 mm
Weight: Approximately 400g
O-ring Seal: EPDM 75 (max. 150°C)
Connections: BSPP (G) 1/4" Threads (ISO 228-1)
Compatible with: Intel Socket 1366, Intel Socket 2011
Parts Included
x1 Heatkiller CPU Rev 3.0 - Socket 1366 / Socket 2011
x1 Installation Parts and Instructions
x1 Hold-Down Plate Set
