The Koolance Frequency Adapter multiplies
INS-FM17N flow meter RPM signals to allow readability by most fan tachometer
headers. For the INS-FM16, it will also enable the LED lighting.
The flow meter RPM reading is intended to allow fan detection software
(including BIOS) to enable the appropriate alarm or shutdown procedure if the
flow meter impeller stops rotating. The "RPMs" represent approximate coolant
flow rate in mL/min and not the flow meter's revolutions.
For accuracy, set the ID switch to either 10/13mm or 6mm depending on your
tubing internal diameter. The "Off/Sync/On" switch configures the LED for
INS-FM16 flow meters.
You are viewing Koolance Flow Meter Frequency Adapter - ADT-FM03