Koolance's inline flow meter provides a visual and electronic indicator of
real-time coolant flow rate. Compatible with 1/4" (6mm), 3/8" (10mm), or 1/2"
(13mm) ID G 1/4 BSP threaded nozzles.
A frequency circuit (sold
separately) multiplies the RPM signal to allow it to be read by most fan
tachometer headers (such as those found on ATX motherboards). This signal is
intended to allow fan detection software (including BIOS) to enable the
appropriate alarm or shutdown procedure if the flow meter impeller stops
rotating. The "RPMs" represent approximate flow meter coolant in mL/min, and not
Flow rate range = 1.0-15 LPM (15.6-240 GPH). Fluid temperature range = 0 - 70°C
(32-158°F). Maximum pressure = 6kgf/cm2 (85 psi). Wire length including the
frequency multiplier board is about 26" (66cm), with product dimensions of
approximately 1" x 1.9" x 0.75" (2.5cm x 4.8cm x 1.9cm). Materials are
nickel-plated brass and acrylic.
Note G 1/4" fittings are not included.
You are viewing Koolance INS-FM17N Coolant Flow Meter