Home > Computer Water Cooling > Fitting - Others > SLI Fittings and D-Plugs >

Swiftech Male to Male SLI & CrossFireX Fitting Chrome - 41 to 65mm


Swiftech Male to Male SLI & CrossFireX Fitting Chrome - 41 to 65mm

Swiftech Male to Male SLI & CrossFireX Fitting Chrome - 41 to 65mm


Swiftech Male to Male SLI & CrossFireX Fitting Chrome - 41 to 65mmSwiftech Male to Male SLI & CrossFireX Fitting Chrome - 41 to 65mmSwiftech Male to Male SLI & CrossFireX Fitting Chrome - 41 to 65mm

Product Description & Info
Swiftech Male to Male SLI & CrossFireX Fitting Chrome - 41 to 65mm



Product Description:
 
G¼ Male-Male adjustable connector fittings for multiple VGA waterblocks in SLI or CrossfireX. This product is part of the Lok-Seal™ family of fittings.
 
Contents & Features Specifications
  • Blister Pack of 1 fitting
  • Material: brass
  • Adjustable length range:
    Metric: 41-65mm - Inch: 1.61-2.59"
  • Finish: high polish chrome plating or black paint
  • Locking nut feature:
     
    Locks male & female in place once spacing adjustment has been set.
  • Hex nut: 
    • Inch: 5/8"
    • Metric: 16mm
  • Lock Nut:
    • Inch: .66"
    • Metric: 16.8mm 
 

Applications examples

Connecting the SLI/CrossFire bridge to the MCW82 waterblock

3 slots spacing
 
Dimensions
 

 

Recommended use
 

  • Initial Tip:  If possible, attach the fittings to the cooling devices first! While not mandatory,  it is always preferable to fasten a fitting to a cooling device prior to installing the device inside the case. This will eliminate interference issues that may be encountered when working with tools inside of space constrained enclosures.
     
  • Fasten the fitting by hand until it mates with the surface of the cooling device. The amount of force necessary to screw the fittings down in “finger tight” mating position may vary from one device to another depending on various factors.  Users are advised to always visually check on the actual position of the fitting relative to the device surface rather than solely relying on feel. There should be little -not to exceed the thickness of a sheet of paper, or no visible gap between the fitting lower lip and the device surface. See the illustration below.

 

  • For complete long-term safety and leak-free operations, Swiftech® recommends that the fittings be locked in place using the recommended tools and that the torque levels specified below be applied:

 

Recommended Torque

Soft Material

Minimum

Maximum (*)

Acetal (POM) and acrylics

1/4 of a turn after initial contact between mating surfaces

1/2 of a turn after initial contact between mating surfaces

Hard Materials

Recommended

Copper, brass, aluminum

1/8 of a turn after initial contact between mating surfaces

 

(*) For full 5mm thread depth – please inspect the device threads prior to applying the maximum
recommended torque – when partial threads exist due to application necessity, only apply the
minimum torque.
 
 
 
 

Recommended Tools

 
 
A small adjustable wrench with jaw opening up to 1” (25.4mm)
may be used as a universal tool instead of the specific tools listed below
 

Specific tool sizes

Male/male
Connectors
Fitting base hex:
 
Flat wrench
Lock Nut
 
Flat or adjustable wrench
G1/4 MM EXT Short (11-18mm)
Metric: 16mm
Inch: 5/8”
N/A
G1/4 MM EXT Medium (20-33mm)
Metric: 16mm
Inch: 5/8”
Metric: 17mm
Inch: adjustable wrench
G1/4 MM EXT Long  (41-65mm)
Metric: 16mm
Inch: 5/8”
Metric: 17mm
Inch: adjustable wrench







Availability: Usually ships the same business day

G1/4MMEXTLONGCHR$9.99 Qty:
Swiftech Male to Male SLI & CrossFireX Fitting Chrome - 41 to 65mm  

You are viewing Swiftech Male to Male SLI & CrossFireX Fitting Chrome - 41 to 65mm