Thermalright 120mm Fan Duct - Blue

Fan Duct Installation Guide  HR-01 K8 Installation   - DETAILS - detail drawing For Lian Li cases and the like   Disclaimer: Thermalright or its owners or partners is not responsible for damage or loss of any kind that may occur as a result of using or misusing this or any product we manufacture. Use common sense and review all product details prior to use. Ask a question   Installation - STEP 1- - STEP 2- HR-01 and its included parts. Connect the end with the shorter head to the system fan.   - STEP 3 - - STEP 4 - Secure the fan duct and the system fan using the included screws. Install the system fan with the fan duct attached, to the case.   - STEP 5 - - STEP 6 - Make sure the end with the taller head is facing the motherboard. Apply the two included adhesive strips to each side of the HR-01 heatsink.   - STEP 7- - STEP 8- Position S-Type Clip onto the heatsink. Connect the end with the taller head to the sides with the adhesive strips and press firmly to ensure a tight seal.   - STEP 9- - STEP 10- Secure the two ends of S-type clip to the lugs on the RM Turn the lock handle on the S-type clip to secure heatsink in place..   - STEP 11- Installation of fan duct completed. For Lian Li cases and the like For those who have the Lian Li or similar computer enclosures with tight spacing between the CPU and the rear wall, in order to install the HR-01 and the fan duct, you will need to remove the 120mm outtake system fan first and then install the HR-01 heatsink. After making sure it’s properly installed and secured in place, connect the fan duct to the heatsink adhered by the double sided strips. Finally insert the 120mm outtake system fan on the other end of the fan duct and secure the fan using the included screws.

Availability: Usually ships the same business day

blueduct$7.99 Qty:
  

You are viewing Thermalright 120mm Fan Duct - Blue