Product Description & Info
The Infinite Horizontal (formerly the
Absolute) and Infinite Vertical (formerly the 3G) are the newest members to the
(UN) lineup. The only limit to your mounting requirements really is your
imagination. You now have infinite ways to mount your pumps, reservoirs, or
whatever else you can think of. By having the pump swivel around the bracket,
you can help eliminate kinks in the tubing which allows for more possibilities
for pump mounting. These can be used for much more than pumps though. Simple to
install, comes with all the hardware to mount the bracket. Requires the stock
rubber grommets for the DDC pumps and the stock mounting screws for the D5.
Application: Laing DDC pump (aka Swiftech
MCP350/MCP355), Danger Den DDC and DDC 3.2, Laing D4/D5 pump (aka Swiftech
MCP650/MCP655(-B), Danger Den D4/D5 Vario and Basic, D-Tek D4/D5 Vario and
Basic, most aftermarket tops.
Increased airflow around the pump- especially in the DDC series
Everything is slotted now so its possible to make micro adjustment when
mounting pumps, etc.
Helps to reduce vibration
There is a new swivel point on the base which rotates the arm 360 degrees
allowing even more adjustments.
Horizontal version is lower than the 3G to allow more room to mount in the
bottom of cases
Powder Coated Black Finish
You are viewing (UN)Designs Infinite Bracket - Horizontal - Black