Home > Computer Water Cooling > Chipset Blocks >

Watercool HEATKILLER NSB Rev3.0 Ni Northbridge / Southbridge ( Nickel Plated ) edition


Watercool HEATKILLER NSB Rev3.0 Ni Northbridge / Southbridge ( Nickel Plated ) edition

Watercool HEATKILLER NSB Rev3.0 Ni Northbridge / Southbridge ( Nickel Plated ) edition



Product Description & Info


The KILLER HEAT ® 3.0 NSB Series combines performance and maximum compatibility. The motherboard coolers are designed so that the compatibility is guaranteed with many different motherboards. By twisting and turning of the bracket, this can be mounted in any desired position. The package contains two brackets, so the cooler can be mounted on all motherboards with a diagonal hole spacing from 43.0 to 79.2 mm. The location of the holes is not important, because the cooler can still be aligned horizontally to the board. The base plate is made of high grade copper and has a very efficient cooling structure, the flow resistance of the cooler is extremely low. Despite its small external dimensions (39x39mm) are the threaded holes (G 1 / 4 inch) 22mm wide apart.

The upper part is made of pure copper, the support and applications of polished stainless steel. To prevent tarnishing of the copper, the top is sealed with a special clear lacquer.


The NSB HEATKILLER ® 3.0 can be installed on the Northbridge and the Southbridge.


Technical data:
Material: Electrolytic copper - nickel-plated, stainless steel
Dimensions (block): (LxWxH) 39 x 39 x 17mm
Weight: 150g
Tested pressure: 5 bar
Seal: EPDM 75 (max. 150 ° C)
Connection: G ¼ in. (DIN ISO 228-1)
Thread distance: 22.0 mm

Delivery:
1x KILLER HEAT ® NSB Rev3.0 plated
1x bracket (43.0 to 59.0 mm)
1x bracket (59.5 to 79.2 mm)
1x mounting hardware / instructions




10203$47.99 Qty:
Watercool HEATKILLER NSB Rev3.0 Ni Northbridge / Southbridge ( Nickel Plated ) edition

You are viewing Watercool HEATKILLER NSB Rev3.0 Ni Northbridge / Southbridge ( Nickel Plated ) edition