The MO-RA3 is the uncompromising development of the successful MO-RA2
The cooling capacity was further increased compared with the very
The data speak for itself, with 28mm copper tube and 2.5 square plates
were used per MO-RA3.
The coolant then flows through the tubes four times in parallel, through
72 rows of tubes.
The fins of the MO-RAs are specially designed for use with low speed
Due to the huge surface of the radiator and the effective geometry
extremely good cooling performance are guaranteed.
The four-parallel connection of pipe, provides in spite of very high
surface area for a low flow resistance.
Extremely versatile, the new, aerodynamically optimized terminal block
with three G1 / 4 "connecting thread. The
M3 countersunk screw can be mounted directly on the MO-RA3 up to 4x
In addition, there are other threads for the integrated installation of
The delivery of the MO-RA3, all components that are necessary to get
started right away.
There are, among other plugs for closing the unneeded ports, also to the
fan screws and spacers for mounting the housing.
By means of the flexible modular system, the MO-RA3.
In the accessories there are various fan panels, fan controls, feet and
The MO-RA3 is produced in Europe. span>
Most of the parts are manufactured in Germany, the development and
installation will also be in Germany.
Attention, product images, the PRO version
Material Internal: copper tubes, aluminum fins
Case material: steel, coated stainless steel
External dimensions (L x W x H): 415 x 383 x 65mm
Tested pressure: 5 bar
Surface: powder-coated black
Connector: 6x G 1 / 4 inch
1x MO RA3 4x180 LT
4x plug G1 / 4 "
4x M4x20mm spacer
1x set of fan screws (16 pieces)
1 installation manual