Product Description & Info
The MO-RA3 is the uncompromising development of the successful MO-RA2 series.
The cooling capacity was further increased compared with the very powerful
The data speak for itself, with 28mm copper tube and 2.5 square plates were used
The coolant then flows through the tubes four times in parallel, through 72 rows
The fins of the MO-RAs are specially designed for use with low speed fans.
Due to the huge surface of the radiator and the effective geometry extremely
good cooling performance are guaranteed.
The four-parallel connection of pipe lines, provides in spite of very high
surface area for a low flow resistance.
Extremely versatile, the new, aerodynamically optimized terminal block with
three G1 / 4 "connecting thread. The
M3 countersunk screw can be installed directly on both sides each up to 4x 180mm
fan on the MO-RA3.
In addition, there are other threads for the integrated installation of optional
The delivery of the MO-RA3, all components that are necessary to get started
There are, among other plugs for closing the unneeded ports, also to the fan
screws and spacers for mounting the housing.
The PRO version adds the ability to mount fans on both sides, the performance
can therefore be increased further.
Moreover, there are top and bottom of the enclosure made of polished stainless
By means of the flexible modular system, the MO-RA3.
In the accessories there are various fan panels, fan controls, feet and external
The MO-RA3 is produced in Europe.
Most of the parts are manufactured in Germany, the development and installation
will also be in Germany.
Material Internal: copper tubes, aluminum fins
Case material: steel, coated stainless steel
External dimensions (L x W x H): 415 x 383 x 65mm
Tested pressure: 5 bar
Surface: powder-coated black
Connector: 6x G 1 / 4 inch
1x MO RA3 4x180 PRO
4x plug G1 / 4 "
4x M4x20mm spacer
1x set of fan screws (32 pieces)
1 installation manual
You are viewing Watercool MO-RA3 4x180 PRO black Radiator