Product Description & Info
The MO-RA3 is the uncompromising development of the successful MO-RA2 series.
The cooling capacity was further increased compared to the very powerful
The data speaks for itself, with 28mm copper tube and 2.5 square plates were
used per MO-RA3.
The coolant then flows through the pipes four times in parallel, through 72 rows
The fins of the MO-RAs are specially designed for low speed fans.
Due to the huge surface of the radiator and the effective geometry extremely
good cooling performance is guaranteed.
The four-parallel connection of pipe lines, provides in spite of very high
surface area for a low flow resistance.
Extremely versatile, the new, aerodynamically optimized terminal block with
three G1 / 4 "connecting thread.
The MO-RA3 can handle up to 9 120mm fans via the use of M3 screws,
In addition, there are other threads for the integrated installation of optional
The delivery of the MO-RA3, all components that are necessary to get started
There are, among other plugs for closing the unneeded thread on, also to the fan
screws and spacers for mounting the housing was intended.
accessories there are various fan panels, fan controls, feet and external
The MO-RA3 is produced in Europe.
Most of the parts are manufactured in Germany, the development and installation
will also be in Germany.
Material Internal: copper tubes, aluminum fins
Case material: steel, coated stainless steel
External dimensions (L x W x H): 415 x 383 x 65mm
Tested pressure: 5 bar
Surface: powder-coated black
Connector: 6x G 1 / 4 inch
1x MO RA3 9x120 LT
4x plug G1 / 4 "
4x M4x20mm spacer
1x set of fan screws (36 pieces)
1 installation manual
You are viewing Watercool MO-RA3 9x120 LT black Radiator